My account
My cart
No Items
» » » Storing your generating set, welding set or waterpump

Follow these steps to properly winter your device:


  1. Carefully clean all the set's outer parts.
  2. Lubricate all rotating parts.
  3. Run the engine dry to avoid any deposits.
  4. Drain the engine oil and refill with new oil.
  5. Unscrew the spark plug and pour 3 cm3 of oil
  6. Rotate the engine 2 or 3 times to distribute the oil.
  7. Check the condition of the air filter and clean or replace it if necessary.